Withdrawn standards

(List of withdrawn standards)

ISO 3003:1974 Dried-milk borers

ISO 3004-1:1986 Light gauge metal containers -- Capacities and related cross-sections -- Part 1: Open-top cans for general food

ISO 3004-2:1989 Light gauge metal containers -- Capacities and related cross-sections -- Part 2: Open-top cans for meat and products containing meat for human consumption

ISO 3004-3:1986 Light gauge metal containers -- Capacities and related cross-sections -- Part 3: Open-top cans for drinks

ISO 3004-4:1986 Light gauge metal containers -- Capacities and related cross-sections -- Part 4: Open-top cans for edible oil

ISO 3004-5:1988 Light gauge metal containers -- Capacities and related cross-sections -- Part 5: Open-top cans for fish and other fishery products

ISO 3004-6:1986 Light gauge metal containers -- Capacities and related cross-sections -- Part 6: Open-top cans for milk

ISO 3017:1981 Abrasive discs -- Designation, dimensions and tolerances -- Selection of disc outside diameter/centre hole diameter combinations

ISO 3025:1974 Cinematography -- Motion-picture camera cartridge, 8 mm Type S, Model II -- Film load position

ISO 3027:1984 Cinematography -- Magnetic stripes and recording head gaps for sound record on 8 mm Type S motion-picture films -- Position and width dimensions

ISO 3029:1995 Photography -- 126-size cartridges -- Dimensions of cartridge, film and backing paper

ISO 3030:1974 Needle roller bearings -- Needle roller and cage assemblies -- Metric series -- Part 1: Radial needle roller and cage assemblies -- Boundary dimensions and tolerances

ISO 3041:1975 Welding requirements -- Categories of service requirements for welded joints

ISO 3046-2:1987 Reciprocal internal combustion engines -- Performance -- Part 2: Test methods

ISO 3062:1974 Oil of sandalwood (Eucarya spicata), Australia

ISO 3064:1977 Oil of petitgrain, Paraguay

ISO 3068:1982 Cinematography -- Magnetic stripes for sound records on 16 mm motion-picture film perforated 8 mm Type S-2R (1-4) and (1-3) -- Positions and width dimensions

ISO 3070-1:1987 Acceptance conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 1: Table-type machines

ISO 3070-2:1978 Test conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 2: Floor type machines

ISO 3070-3:1982 Acceptance conditions for boring and milling machines with horizontal spindle -- Testing of the accuracy -- Part 3: Planer type machines with movable column

ISO 3080:1974 Guide for the mechanical balancing of marine main steam turbine machinery for merchant service

ISO 3081:1986 Iron ores -- Increment sampling -- Manual method

ISO 3083:1986 Iron ores -- Preparation of samples -- Manual method

ISO 3094:1974 Fruit and vegetable products -- Determination of copper content -- Photometric method

ISO/R 3097:1974 Withdrawal of ISO 3097-1974

ISO 3098-1:1974 Technical drawings -- Lettering -- Part 1: Currently used characters

ISO 3098-2:1984 Technical drawings -- Lettering -- Part 2: Greek characters

ISO 3098-3:1987 Technical drawings -- Lettering -- Part 3: Diacritical and particular marks for the Latin alphabet

ISO 3098-4:1984 Technical drawings -- Lettering -- Part 4: Cyrillic characters

ISO 3099:1974 Oilseed residues -- Determination of total nitrogen content

ISO 3106:1974 Dental zinc oxide/eugenol filling materials

ISO 3115:1981 Castings in magnesium alloys containing zirconium -- Chemical composition and mechanical properties

ISO/TR 3134-1:1977 Light metals and their alloys -- Terms and definitions -- Part 1: Materials

ISO/TR 3134-2:1977 Light metals and their alloys -- Terms and definitions -- Part 2: Unwrought products

ISO/TR 3134-3:1977 Light metals and their alloys -- Terms and definitions -- Part 3: Wrought products

ISO/TR 3134-4:1977 Light metals and their alloys -- Terms and definitions -- Part 4: Castings

ISO 3145:1974 Rolling bearings -- Bearings with spherical outside surface and extended inner ring width -- Eccentric locking collars

ISO 3160:1975 Withdrawal of ISO 3160-1975

ISO 3162:1974 Caravans and light trailers -- Couplings for vacuum braking systems -- Dimensional characteristics

ISO 3166:1993 Codes for the representation of names of countries

ISO/TR 3172:1974 Paints and varnishes -- Large scale brushing test

ISO 3173:1974 Road vehicles -- Apparatus for measurement of the opacity of exhaust gas from diesel engines operating under steady state conditions

ISO 3175:1995 Textiles -- Evaluation of stability to machine dry-cleaning

ISO 3183:1980 Oil and natural gas industries -- Steel line pipe

ISO 3206:1975 Surface active agents -- Analysis of technical alkane sulphonates -- Determination of alkane monosulphonates content

ISO 3212:1975 Polypropylene pipes -- Burst test requirements

ISO 3214:1974 Oil of Litsea cubeba

ISO 3232:1974 Paints and varnishes -- Determination of quantity of material in a container

ISO 3243:1975 Keyboards for countries whose languages have alphabetic extenders -- Guidelines for harmonization

ISO 3244:1984 Office machines and data processing equipment -- Principles governing the positioning of control keys on keyboards

ISO 3246:1977 Dentistry -- Working space of the dentist -- Definitions and principles

ISO 3249:1975 Reciprocating internal combustion engines -- Definitions of locations on an engine

ISO 3261:1975 Fire tests -- Vocabulary

ISO 3262:1975 Extenders for paints

ISO 3263:1974 Withdrawal of ISO 3263-1974

ISO 3264:1974 Withdrawal of ISO 3264-1974

ISO 3268:1978 Plastics -- Glass reinforced materials -- Determination of tensile properties

ISO 3276:1975 Withdrawal of ISO 3276-1975

ISO 3277:1974 Withdrawal of ISO 3277-1974

ISO 3278:1974 Withdrawal of ISO 3278-1974

ISO 3279:1974 Withdrawal of ISO 3279-1974

ISO 3280:1974 Withdrawal of ISO 3280-1974

ISO 3281:1974 Withdrawal of ISO 3281-1974

ISO 3283:1974 Withdrawal of ISO 3283-1974

ISO 3290:1975 Rolling bearings -- Bearing parts -- Balls for rolling bearings

ISO 3296:1975 Withdrawal of ISO 3296-1975

ISO 3300:1976 Photographic grade sodium thiosulphate, anhydrous -- Specification

ISO 3302:1990 Rubber -- Dimensional tolerances for use with products

ISO 3307:1975 Information interchange -- Representations of time of the day

ISO 3309:1991 Information technology -- Telecommunications and information exchange between systems -- High-level data link control (HDLC) procedures Frame structure

ISO/TR 3311:1974 Withdrawal of ISO/TR 3311-1975

ISO 3335:1977 Extruded solid profiles in aluminium-zinc- magnesium alloy Al Zn4,5 Mg1 (7020) -- Chemical composition and mechanical properties

ISO 3355:1975 Shoe sizes -- System of length grading (for use in the Mondopoint system)

ISO 3365-1:1977 Indexable (throwaway) carbide inserts for milling cutters -- Dimensions -- Part 1: Square inserts

ISO 3365-2:1980 Indexable (throwaway) hardmetal inserts for milling cutters -- Dimensions -- Part 2: Triangular inserts

ISO 3367:1975 Coated abrasives -- Rolls for widths of 50 mm and greater -- Any backing Designation and dimensions

ISO 3368:1975 Coated abrasives -- Cloth rolls up to and including 40 mm width -- Designation and dimensions

ISO 3388:1977 Patent documents -- Bibliographic references -- Essential and complementary elements

ISO 3395:1975 Rotary drilling equipment -- Roller bits and blade drag bits

ISO 3396:1975 Rotary drilling equipment -- Diamond drilling bits and diamond core bits

ISO 3406:1975 Tobacco and tobacco products -- Expression of analytical test results

ISO 3408:1975 Ball screws -- Nominal diameters and basic leads -- Metric and inch series

ISO 3411:1982 Earth-moving machinery -- Human physical dimensions of operators and minimum operator space envelope

ISO 3413:1975 Information processing -- Recorded magnetic tapes for interchange instrumentation applications -- Standard tape speeds and track configurations

ISO 3418:1975 Withdrawal of ISO 3418-1975

ISO 3451:1976 Withdrawal of ISO 3451-1976

ISO 3461:1976 Graphic symbols -- General principles for presentation

ISO 3461-2:1987 General principles for the creation of graphical symbols -- Part 2: Graphical symbols for use in technical product documentation

ISO 3462:1980 Tractors and machinery for agriculture and forestry -- Seat reference point -- Method of determination

ISO 3464:1977 Textile machinery and accessories -- Bearings for bottom rollers and allied dimensions -- Caps with central nose and caps with side lugs

ISO 3471:1980 Earth-moving machinery -- Roll-over protective structures -- Laboratory tests and performance requirements

ISO 3471-1:1986 Earth-moving machinery -- Roll-over protective structures -- Laboratory tests and performance requirements -- Part 1: Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrapers, articulated steer dumpers

ISO 3472:1975 Unplasticized polyvinyl chloride (PVC) pipes -- Specification and determination of resistance to acetone

ISO 3473:1977 Unplasticized polyvinyl chloride (PVC) pipes -- Effect of sulphuric acid -- Requirement and test method

ISO 3478:1975 Polypropylene (PP) pipes -- Determination of longitudinal reversion

ISO 3480:1976 Polypropylene (PP) pipes -- Maximum permissible longitudinal reversion

ISO/TR 3485:1980 Plastics -- Polypropylene granules -- Determination of thermal stability in air by pH method

ISO 3486:1980 Wrought copper and copper alloys -- Cold-rolled flat products delivered in straight lengths (sheet) -- Dimensions and tolerances

ISO 3487:1980 Wrought copper and copper alloys -- Cold-rolled flat products in coils or on reels (strip) -- Dimensions and tolerances

ISO 3488:1982 Wrought copper and copper alloys -- Extruded round, square or hexagonal bars -- Dimensions and tolerances

ISO 3489:1984 Wrought copper and copper alloys -- Drawn round bars -- All minus tolerances on diameter and form tolerances

ISO 3490:1984 Wrought copper and copper alloys -- Drawn hexagonal bars -- All minus tolerances on width across flats and form tolerances

ISO 3491:1984 Wrought copper and copper alloys -- Drawn square bars -- All minus tolerances on width across flats and form tolerances

ISO 3492:1982 Wrought copper and copper alloys -- Drawn round wire -- Tolerances on diameter

ISO 3495:1975 Dried milk -- Determination of lactic acid and lactates content

ISO 3498:1979 Lubricants for machine tools -- Classification

ISO 3499:1976 Plastics -- Aqueous dispersions of homopolymers and copolymers of vinyl acetate -- Determination of bromine number

ISO 3506:1979 Corrosion-resistant stainless steel fasteners -- Specifications

ISO 3534:1977 Statistics -- Vocabulary and symbols

ISO 3536-1:1975 Road vehicles -- Safety glasses -- Vocabulary

ISO 3541:1985 Earth-moving machinery -- Dimensions of fuel filler opening

ISO 3542:1975 Withdrawal of ISO 3542-1975

ISO 3544:1978 Atomizing oil burners of the monobloc type -- Safety times and safety control and monitoring devices

ISO 3545:1981 Steel tubes and tubular shaped accessories with circular cross-section -- Symbols to be used in specifications

ISO 3547:1976 Plain bearings -- Wrapped bushes -- Dimensions, tolerances and methods of checking

ISO 3550:1985 Cigarettes -- Determination of loss of tobacco from the ends

ISO 3553:1975 Road vehicles -- High tension connection for ignition coils and distributors

ISO 3554:1976 Credit cards -- Magnetic stripe encoding for tracks 1 and 2

ISO 3555:1977 Centrifugal, mixed flow and axial pumps -- Code for acceptance tests -- Class B

ISO 3565:1975 Meat and meat products -- Detection of salmonellae (Reference method)

ISO 3571-1:1977 Withdrawal of ISO 3571/1-1977

ISO 3576:1976 Hot-rolled carbon steel sheet coils for the production of cold-reduced products

ISO 3577:1988 Animal fats -- Determination of Bömer value

ISO 3592:1978 Numerical control of machines -- NC processor output -- Logical structure (and major words)

ISO 3596-1:1988 Animal and vegetable fats and oils -- Determination of unsaponifiable matter -- Part 1: Method using diethyl ether extraction (Reference method)

ISO 3596-2:1988 Animal and vegetable fats and oils -- Determination of unsaponifiable matter -- Part 2: Rapid method using hexane extraction

ISO 3597:1977 Textile glass reinforced plastics -- Composites in the form of rods made from textile glass rovings -- Determination of flexural (cross-breaking) strength

ISO 3605:1987 Textile glass -- Rovings -- Determination of compressive strength of rod composites

ISO 3606:1976 Unplasticized polyvinyl chloride (PVC) pipes -- Tolerances on outside diameters and wall thicknesses

ISO 3607:1977 Polyethylene (PE) pipes -- Tolerances on outside diameters and wall thicknesses

ISO 3608:1976 Chlorinated polyvinyl chloride (CPVC) pipes -- Tolerances on outside diameters and wall thicknesses

ISO 3609:1977 Polypropylene (PP) pipes -- Tolerances on outside diameters and wall thicknesses

ISO 3612:1977 Tobacco and tobacco products -- Cigarettes -- Determination of rate of free combustion

ISO 3613:1980 Chromate conversion coatings on zinc and cadmium -- Test methods

ISO 3614:1975 Shipbuilding -- Inland vessels -- Detachable ladders

ISO 3615:1976 Magnetic tape for instrumentation applications -- Standardization of analogue modes of recording

ISO 3630:1984 Dental root canal instruments

ISO 3632:1980 Saffron -- Specification

ISO 3655-1:1976 Test conditions for vertical turning and boring lathes with one or two columns -- Testing of the accuracy -- Part 1: Lathes with a single fixed or movable table

ISO 3670:1979 Plastics pipes and fittings -- Test method for the impact resistance of polyethylene (PE) tapping tees

ISO 3682:1996 Binders for paints and varnishes -- Determination of acid value -- Titrimetric method

ISO 3683:1978 Soft soldered joints -- Determination of shear strength

ISO 3686:1976 Test conditions for turret and single spindle co-ordinate drilling and boring machines with table of fixed height with vertical spindle -- High accuracy machines -- Testing of the accuracy

ISO 3687:1976 Paper and board -- Determination of air resistance (Gurley)

ISO 3710:1990 Lead chrome green pigments -- Specifications and methods of test

ISO/TR 3717:1975 Withdrawal of ISR/TR 3717-1975

ISO/TR 3718:1975 Withdrawal of ISO/TR 3718-1975

ISO 3737:1976 Agricultural tractors and self-propelled machines -- Test method for enclosure pressurization systems

ISO 3738:1976 Hardmetals -- Rockwell hardness test (Scale A)

ISO 3742:1988 Acoustics -- Determination of sound power levels of noise sources -- Precision methods for discrete-frequency and narrow-band sources in reverberation rooms

ISO 3743:1988 Acoustics -- Determination of sound power levels of noise sources -- Engineering methods for special reverberation test rooms

ISO 3762:1979 Paper -- Preparation of a letterpress print for test purposes

ISO 3767:1979 Withdrawal of ISO 3767-1979

ISO 3768:1976 Metallic coatings -- Neutral salt spray test (NSS test)

ISO 3769:1976 Metallic coatings -- Acetic acid salt spray test (ASS test)

ISO 3770:1976 Metallic coatings -- Copper-accelerated acetic acid salt spray test (CASS test)

ISO 3777:1976 Radiographic inspection of resistance spot welds for aluminium and its alloys -- Recommended practice

ISO 3782:1980 Paper and board -- Determination of resistance to picking -- Accelerating speed method using the IGT tester (Pendulum or spring model)

ISO 3787:1976 Wood -- Test methods -- Determination of ultimate stress in compression parallel to grain

ISO 3788:1976 Information processing -- 9- track, 12,7 mm (0.5 in) wide magnetic tape for information interchange recorded at 63 rpmm (1 600 rpi), phase encoded

ISO 3789:1976 Withdrawal of ISO 3789-1976

ISO 3789-4:1989 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Location and method of operation of operator controls -- Part 4: Controls for forestry log loaders

ISO 3795:1976 Road vehicles -- Determination of burning behaviour of interior materials for motor vehicles

ISO 3798:1976 Tinplate and blackplate -- Minimum packaging requirements

ISO 3799:1976 Textile machinery and accessories -- Hydraulic lubricating fittings for textile machinery

ISO 3800-1:1977 Threaded fasteners -- Axial load fatigue testing -- Part 1: Test methods

ISO 3804:1977 Plywood -- Determination of dimensions of test pieces

ISO 3805:1977 Plywood -- Determination of density

ISO 3806:1977 Plywood -- Determination of moisture content

ISO 3807:1977 Dissolved acetylene cylinders -- Basic requirements

ISO 3811:1979 Meat and meat products -- Detection and enumeration of presumptive coliform bacteria and presumptive Escherichia coli -- (Reference method)

ISO 3812:1976 Withdrawal of ISO 3812-1976

ISO/TR 3818:1977 Ropes and cordage -- Rope assemblies used in slinging -- Safe working loads

ISO 3824:1984 Dental silicophosphate cement (hand-mixed)

ISO 3825:1977 Glass transfusion bottles for medical use -- Chemical resistance

ISO 3827-1:1977 Shipbuilding -- Co-ordination of dimensions in ships' accommodation -- Part 1: Principles of dimensional co-ordination

ISO 3827-2:1977 Shipbuilding -- Co-ordination of dimensions in ships' accommodation -- Part 2: Glossary of terms

ISO 3827-3:1977 Shipbuilding -- Co-ordination of dimensions in ships' accommodation -- Part 3: Co-ordinating sizes for components and assemblies

ISO 3827-4:1977 Shipbuilding -- Co-ordination of dimensions in ships' accommodation -- Part 4: Controlling dimensions

ISO 3831:1979 Timekeeping instruments -- Classification and numbering system and nomenclature of components for watches and clocks

ISO 3834:1978 Welding -- Factors to be considered when assessing firms using welding as a prime means of fabrication

ISO/TR 3836:1978 Shoe sizes -- System of width grading (for use in the Mondopoint system)

ISO 3840:1976 Petroleum distillates -- Determination of olefinic plus aromatic hydrocarbons content

ISO 3844:1977 Shoe sizes -- Method of marking

ISO 3851:1977 Capsulated dental silicate and silico-phosphate filling materials

ISO 3854:1976 Road vehicles -- Caravans and light trailers -- Vacuum braking Measurement of reaction time

ISO 3858:1977 Withdrawal of ISO 3858-1977

ISO 3872:1976 Graphic technology -- Sheet-fed printing machines -- Range of sizes

ISO 3879:1977 Welded joints -- Recommended practice for liquid penetrant testing

ISO/TR 3888:1975 Road vehicles -- Test procedure for a severe lane-change manoeuvre

ISO 3892:1980 Conversion coatings on metallic materials -- Determination of coating mass per unit area -- Gravimetric methods

ISO 3897:1997 Photography -- Processed photographic plates -- Storage practices

ISO 3905:1980 Paints and varnishes -- Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using black and white charts)

ISO 3906:1980 Paints and varnishes -- Determination of contrast ratio (opacity) of light coloured paints at a fixed spreading rate (using polyester film)

ISO 3914:1976 Withdrawal of ISO 3914-1976

ISO 3916:1977 Shipbuilding -- Inland navigation -- Rope tubs

ISO 3918:1977 Milking machine installations -- Vocabulary

ISO 3920:1976 Honing stones of square section -- Designation and dimensions

ISO 3921:1976 Honing stones of rectangular section -- Designation and dimensions

ISO 3922:1978 Continuous mechanical handling equipment -- Rotary vane feeder -- Dimensional specifications

ISO 3923-3:1986 Metallic powders -- Determination of apparent density -- Part 3: Oscillating funnel method

ISO 3942:1976 Photographic grade sodium carbonate, monohydrate -- Specification

ISO 3945:1985 Mechanical vibration of large rotating machines with speed range from 10 to 200 r/s -- Measurement and evaluation of vibration severity in situ

ISO 3955:1977 Sintered metal materials, excluding hardmetals -- Sampling

ISO 3962:1977 Materials and equipment for petroleum and natural gas industries -- Tool joints for steel drill pipe for oil or natural gas wells

ISO 3977:1991 Gas turbines -- Procurement

ISO 3983:1977 Cereals and cereal products -- Determination of alpha-amylase activity -- Colorimetric method

©ISO            Last updated: 2001-04-30